How To Remove Vivint Doorbell Camera

There will be a situation when you lot want to remove your Vivint Doorbell camera from the wall. The occasion can be moving to a new place, changing the camera'southward position, dwelling renovation, or temporarily removing the system from the area due to some work.

The Vivint designer has already thought about such a situation, and they have built the system in a way that makes the removal or transferable of the device like shooting fish in a barrel.

We will explain how to remove the Vivint doorbell camera from the wall without dissentious the internal circuit. Information technology would too exist all-time if you disabled the alarm before touching the device; else, it would warning continuously, making your neighbour unhappy with the sound.

Earlier you begin the removal procedure, y'all should carry the required tools, such as a Philips screwdriver. The right tool would make the process easy, and you lot will remove the kit in a few minutes.

Hither is the step by step guide to removing the Vivint doorbell photographic camera from the excursion.

i) Disable the Vivint smart home system:

The Vivint smart home arrangement is connected to the sensors that make it safe from the thief. The intelligent organization produces an warning if anyone touches the system or doorbell.

Before you offset to detach your doorbell camera, ensure that you have disabled the alert using the smartphone application.

Double-check the settings and allow the family member know that you are performing the chore to avoid confusion. One time you lot are done with disconnecting, your alarm organization moves to the adjacent stride.

2) Unplug the organization from the ability source:

It is essential to disconnect the system from the power source. Switch off the button before removing the plug. Gently unplug the course and go on all the wires aside; otherwise, it would tangle during the work. Also, take intendance of live wires or direct electricity flow from the circuit.

Utmost caution is needed to handle the electrical board. Do not touch or concord the live wire during the process. It would be life-threatening. Also, the fire tin can harm your essentials around it.

iii) Removing the panel comprehend:

In the next pace, achieve to your doorbell alarm system. Use the Philips screwdriver. It is recommended that you check whatever direct current to the circuit using the tester.

The tester is the device looks similar to the screwdriver. When yous bear on the tester's pointed part to the course, the light in the tester volition blink, indicating the source of the electric ability.

Information technology is used to detect any power running in the application. There are chances that fifty-fifty if you switch off the electrical current in the organization, the electricity is still flowing. You may feel the current when there is contact with the system. Therefore, it is appropriate to stay alert about any electricity menses in the system while performing the chore.

Vivint Doorbell Camera Angle Mount

Compatibility tested with the Vivint Doorbell Camera DB2CS.
Ideal for doorbells mounted perpendicular to the doo

If everything looks OK, move to remove the spiral at the top of your panel using the screwdriver. The console is fastened to the circuit with two tabs mounted on the superlative. Push the tab gently and pull the cover out and down. Hang the panel cover on the backplate.

You can use a white safety strip to fasten the lid. Do not worry if you hear the beeping alarm. The organisation indicates the opening of the encompass with the beeping sound. The sound will last for a few minutes. Keep the console bated in a safe place to avoid any accidental damage.

4) Removing wires from the panel

This step may require using a soft paw while handling the wires. Open the back panel cover. There will exist two sets of wires inside. One is a power wire that directs the current to the circuit, and the other is for batteries. Use the small-scale size screwdriver to remove the ability wire gently. If your panel is connected to the ethernet cable, remove the cable and and then open the excursion. Remember to disconnect the ethernet.

5) Remove Screws

Remove the screws bachelor from the backplate. Once the screws are removed, the plate and panel volition easily become detached from the wall. There will exist small holes in the wall and then ensure that y'all practice not touch them. Keep information technology as if you want to fix the panel once again later on yous are done with your work.

half dozen) Remove power wires

Check the stop of the outlet. Yous will find the power cable attached to it. Gently pull the power wire. Y'all may take to pull the outlet encompass earlier removing the wires.

7) Reassemble your console

Put the front cover on the superlative of it and push it gently to set up information technology to the place. You will hear the click audio when the panel gets attached to it. Now replace the top screw.

8) Final touches

Advisedly re-screw the top section using the screws into your wall. Place the kit given to you on summit of it. The plate volition protect the identify from the dust and direct human contact. Information technology will mitt on the wall and expect cute.

You are done with the removal of the Vivint doorbell camera from the wall. If you are moving to another identify, do non forget to bring the console with you to your new home.

Vivint doorbell camera from the wall

The Vivint doorbell camera is ergonomically designed by keeping all the aspects in heed. One time yous have the system in place, yous volition no demand to worry nigh installing and removing the panel (remove vivint thermostat) (remove vivint thermostat). The organisation comes with an easy installation guide.

Yous can follow these guides when y'all want to re-install the Vivint doorbell camera to another place. Additionally, a simple tool would exist sufficient to manage all the equipment of the organization.

why should you use Vivint doorbell camera?

Vivint doorbell cameras are great equipment in maintaining the security in your home and part premises. Once the system is installed, the performance works 24 x 7 making it autonomous.

Any unforeseen event would be tracked and counted as a thief attack. The owner of the Vivint organization will exist notified with the bulletin when there is unusual activity.

After all, the security of your dearest once and the avails is essential for you. You cannot comprise it. Whatsoever direct attack from the robber or thief would be life-threatening. The security camera enables you to track and record the activities outside of your door.

The commitment boy who enters your premises would be alerted by the doorbell sound. Any person walking through your door would not attempt whatever illegal activity subsequently seeing the doorbell camera.

What is the Voice alert of the Vivint doorbell camera?

Vivint doorbell cameras are in active mode all the time. The system'due south wifi connectivity enables the possessor to track the activities and answer directly to the voice command.

The speaker mounted on the doorbell camera produces the voice message now instructed past the possessor. It works remotely, and y'all tin give a bulletin from anywhere in the world using the wifi service.

Conclusion:

The Vivint doorbell photographic camera is excellent for handling the security of your domicile. Yous can remove the kit whenever you lot want by following the above instructions. Yous can fifty-fifty take the help of the experts who will visit your location to remove the organization. The doorstep service is available at the Vivint.

The Vivint team works with you during your need, and you tin can instruct them to manage or maintain the system in good condition. Regular maintenance would keep your design intact and fix to protect your dwelling house.

Keep Reading: